MEMBRANE SEPARATION & WATER PURIFICATION johnny@minipore.com ↗
EXTREPUREMEMBRANE TECHNOLOGY
Representative product photo; appearance and dimensions vary by model.
Representative product photo; appearance and dimensions vary by model.

UF / SERIES OVERVIEW

Inside-out ultrafiltration

Six PVC / PAN configurations. Slash-separated names identify one source-table row, not separate products.

Request a quote Technical information ↓
APPLICATION FIT

Pretreatment & clarification

TECHNOLOGY IN CONTEXT

A precise fit for your water process.

A porous hollow-fiber barrier separates particles and colloids. Backwashing and cleaning are part of operation.

Discuss your requirements

  • Feed-water analysis and pretreatment
  • Model-specific flow and operating conditions
  • Dimensions, materials and system compatibility

INDIVIDUAL PRODUCTS

Choose your model.

PRODUCT INFORMATION

Configuration at a glance

Series
Inside-out
Filtration direction
Inside-out
Membrane material
PVC / PAN

MODEL CONFIGURATIONS

Model specifications

Official website model table · Published source-table values; performance varies with feed water and operating conditions. Confirm the current model-specific data sheet before design.

UF4040 / HM4040 View specifications +
Design flux · L/(m²·h)
40–80
Membrane material
PVC / PAN
Fiber inner / outer diameter · mm
1.0 / 1.6 mm
Membrane area · m²
4
Maximum feed pressure · MPa
0.30
Maximum TMP · MPa
＜0.20
Recommended operating differential pressure · MPa
0.01–0.10
HM4046 / HM90 View specifications +
Design flux · L/(m²·h)
40–80
Membrane material
PVC / PAN
Fiber inner / outer diameter · mm
1.0 / 1.6 mm
Membrane area · m²
4.5
Maximum feed pressure · MPa
0.30
Maximum TMP · MPa
＜0.20
Recommended operating differential pressure · MPa
0.01–0.10
HM160 View specifications +
Design flux · L/(m²·h)
40–80
Membrane material
PVC / PAN
Fiber inner / outer diameter · mm
1.0 / 1.6 mm
Membrane area · m²
15
Maximum feed pressure · MPa
0.30
Maximum TMP · MPa
＜0.20
Recommended operating differential pressure · MPa
0.01–0.10
UF8040 / HM8040 View specifications +
Design flux · L/(m²·h)
40–80
Membrane material
PVC / PAN
Fiber inner / outer diameter · mm
1.0 / 1.6 mm
Membrane area · m²
21
Maximum feed pressure · MPa
0.30
Maximum TMP · MPa
＜0.20
Recommended operating differential pressure · MPa
0.01–0.10
HM8060 / HM200 View specifications +
Design flux · L/(m²·h)
40–80
Membrane material
PVC / PAN
Fiber inner / outer diameter · mm
1.0 / 1.6 mm
Membrane area · m²
25
Maximum feed pressure · MPa
0.30
Maximum TMP · MPa
＜0.20
Recommended operating differential pressure · MPa
0.01–0.10
HM1060 / HM250 View specifications +
Design flux · L/(m²·h)
40–80
Membrane material
PVC / PAN
Fiber inner / outer diameter · mm
1.0 / 1.6 mm
Membrane area · m²
50
Maximum feed pressure · MPa
0.30
Maximum TMP · MPa
＜0.20
Recommended operating differential pressure · MPa
0.01–0.10

Test conditions & reference basis

Fiber dimensions
Inner / outer diameter values use mm as explicitly written in source cells; the website column heading incorrectly says μm.
Alias convention
Each slash-separated designation is one configuration. Material choices do not create extra model rows.
Permeate SDI₁₅
<3
Expected filtrate turbidity
<1 NTU

Specify with confidence.

Confirm the exact model, current data-sheet revision, feed-water limits and test conditions before finalizing your design. The published specifications follow the designated source for this series; no legacy-only model variants are combined into this table.

Ask for the current data sheet

Continue exploring.

All UF products →

LET’S DEFINE THE RIGHT FIT

Your water. Your process.
A clearer starting point.

Tell us about your feed water and the quality you need.

Talk to us