Official website model table · Published source-table values; performance varies with feed water and operating conditions. Confirm the current model-specific data sheet before design.

LPHM-10040 View specifications +

Series: LP
Dimensions / element size: 10 inch
Salt rejection · % (residential: as stated): 99.5
Permeate flow · GPD (m³/d): 13800（52.2）
Active membrane area · ft²: 610
Active membrane area · m²: 56.7
Test pressure · psi (MPa): 225（1.55）
Test NaCl concentration · ppm: 2000
Recovery · %: 15

LPHM-8040 View specifications +

Series: LP
Dimensions / element size: 8 inch
Salt rejection · % (residential: as stated): 99.5
Permeate flow · GPD (m³/d): 10500（39.7）
Active membrane area · ft²: 400
Active membrane area · m²: 37.0
Test pressure · psi (MPa): 225（1.55）
Test NaCl concentration · ppm: 2000
Recovery · %: 15

LPHM-6040 View specifications +

Series: LP
Dimensions / element size: 6 inch
Salt rejection · % (residential: as stated): 99.5
Permeate flow · GPD (m³/d): 5500（20.8）
Active membrane area · ft²: 210
Active membrane area · m²: 19.5
Test pressure · psi (MPa): 225（1.55）
Test NaCl concentration · ppm: 2000
Recovery · %: 15

LPHM-4040 View specifications +

Series: LP
Dimensions / element size: 4 inch
Salt rejection · % (residential: as stated): 99.5
Permeate flow · GPD (m³/d): 2500（9.5）
Active membrane area · ft²: 94
Active membrane area · m²: 8.7
Test pressure · psi (MPa): 225（1.55）
Test NaCl concentration · ppm: 2000
Recovery · %: 15

Test conditions & reference basis

Test basis: Test pressure, NaCl concentration and recovery are listed per model. Temperature is not specified in the source table.

Specify with confidence.

Confirm the exact model, current data-sheet revision, feed-water limits and test conditions before finalizing your design. The published specifications follow the designated source for this series; no legacy-only model variants are combined into this table.

Ask for the current data sheet