MODEL / RESIDENTIAL RO

ULP3013-600

ULP residential RO

Products / Residential RO / ULP residential RO

MODEL INFORMATION

Technical specifications.

Source-table values are provided for initial comparison. Confirm current specifications and suitability before design or ordering.

Enquire about this model ↗

Average permeate flow · GPD: 600
Test pressure / recovery: 80 psi / 50%
Salt rejection · % (residential: as stated): 90–95%
A · element length · mm: 333
B · element diameter · mm: 67.8
C · element tube diameter · mm: 17
D1 · element end diameter · mm: 21
D2 · element end spacing · mm: 21

Conditions & notes

Dimensions: All A / B / C / D1 / D2 values are in mm. A: element length; B: element diameter; C: element tube diameter; D1: element end diameter; D2: element end spacing (source terminology).
Flow basis: Average permeate flow in GPD, not industrial GPD (m³/d). Pressure and recovery are model-specific.
Test solution: GB 34914-2021 reference mixed test solution, 1000±100 μS/cm.
Source variability: Individual element flow may vary by 15%; rejection may vary by 2%, as stated in the source.

Published source-table values; performance varies with feed water and operating conditions. Confirm the current model-specific data sheet before design.

Representative membrane construction detail — Representative category image, not a photograph identifying this specific model.

LET'S TALK WATER

Start with the right questions.

Tell us about your feed water, process and performance requirements.

Discuss your project ↗