KXA-150L

Technical specifications.

Source-table values are provided for initial comparison. Confirm current specifications and suitability before design or ordering.

Standard product-water flow

150 L/H

Product-water flow range

130-170 L/h

Current

0-2 A DC

Voltage (source unit unspecified)

0-220 (unit not specified in source)

Recovery · %

75-85

Product-water resistivity

15-18.25 MΩ·cm

Mounting-foot spacing

178 × 75 mm

Overall dimensions

250 × 160 × 391 mm

Diluate-water connectors

3/8 inch quick connector (3 fen)

Concentrate-water connectors

1/4 inch quick connector (2 fen)

Conditions & notes

Feed basis

Brochure physical p7 contains general feed requirements, not individual model test certificates. Model-specific test temperature is not listed.

Feed temperature

5–35°C; preferred 25°C (general brochure requirement, not a model test temperature)

Feed pressure

1.5–5.0 bar

Normal-flow pressure drop

1.4–2.1 bar

Feed pH

6.5–9.0

Feed conductivity

1–10 μS/cm; second-pass RO permeate

CO₂

<5 ppm

Total hardness

<0.5 ppm; conversion basis not specified

Reactive silica

≤0.5 ppm; preferred ≤0.2 ppm

TOC

≤0.5 ppm

Residual chlorine

≤0.03 ppm

Fe / Mn

≤0.01 ppm

Electrical basis

Current is DC. The voltage table does not print a unit; no voltage unit is inferred.

Published source-table values; performance varies with feed water and operating conditions. Confirm the current model-specific data sheet before design. Identities and specifications follow the supplied module brochure parameter tables, not photographed KLX labels.