KG-3

KG-3 / TECHNICAL DATA

Model specifications

Model / source-table designation

KG-3

Standard product-water flow

3 m³/h

Product-water flow range

2.5-3.5 m³/h

Current

1-5.2 A DC

Voltage (source unit unspecified)

0-400 (unit not specified in source)

Recovery · %

90-95

Product-water resistivity

15-18.25 MΩ·cm

Overall dimensions

498 × 300 × 610 mm

Diluate-water connectors

DN25 imperial female thread

Concentrate-water connectors

DN20 imperial female thread

Other connectors

Electrode-water outlet: quick connector; size not specified

Source clarification required

KG follows the parameter table. Adjacent photographs labelled XG-3 / XG-3X are not confirmed equivalents. Interface labels require confirmation; mounting-foot dimensions are not specified.

Series configuration

Series

KG

Process position

RO permeate polishing

Test conditions & reference basis

Feed basis

Brochure physical p7 contains general feed requirements, not individual model test certificates. Model-specific test temperature is not listed.

Feed temperature

5–35°C; preferred 25°C (general brochure requirement, not a model test temperature)

Feed pressure

1.5–5.0 bar

Normal-flow pressure drop

1.4–2.1 bar

Feed pH

6.5–9.0

Feed conductivity

1–10 μS/cm; second-pass RO permeate

CO₂

<5 ppm

Total hardness

<0.5 ppm; conversion basis not specified

Reactive silica

≤0.5 ppm; preferred ≤0.2 ppm

TOC

≤0.5 ppm

Residual chlorine

≤0.03 ppm

Fe / Mn

≤0.01 ppm

Electrical basis

Current is DC. The voltage table does not print a unit; no voltage unit is inferred.

Published source-table values; performance varies with feed water and operating conditions. Confirm the current model-specific data sheet before design. Identities and specifications follow the supplied module brochure parameter tables, not photographed KLX labels.

Technical reference: Supplied EDI module brochure · Physical p11. Published source values are not a guarantee of site performance.